Water Pump| Welcome Guest ( Log In | Register ) | Resend Validation Email |
   |
Water Pump| lord1nz |
Posted: December 20, 2008 08:37 pm
|
|
Member  Group: Members Posts: 22 Member No.: 1400 Joined: October 29, 2008  |
Hi Guys - Just fitted recon water pump and heater pipes to my S1 V6 - I want to be sure to get all air out of system - any tips that might help - The V6 does not seem to have any bleed screws - Thanks Graeme
|
 
|
| Andmcit |
Posted: December 20, 2008 08:52 pm
|
 Andre's Mate Group: Members Posts: 2086 Member No.: 7 Joined: August 15, 2003 |
The V6 cooling circuit is self bleeding - the small hose that runs from the convoluted top hose to
the expansion tank on the driver's wing is the actual bleeding circuit feeding through any air to the tank which has a breather on it. Only other thing you can try to help it along is to give the top hose a helping squeeze to coax the last trapped air out. Andrew This post has been edited by Andmcit on December 20, 2008 08:53 pm |
|
|
| lord1nz |
Posted: December 26, 2008 09:39 pm
|
|
Member Group: Members Posts: 22 Member No.: 1400 Joined: October 29, 2008 |
Thanks - Seems to have worked well - Back on road again and loving it.
|
|
|
0 User(s) are reading this topic (0 Guests and 0 Anonymous Users)
0 Members:
 |
|
Skin arobase par alphega @ PCentraide 2005 (original)
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
Powered by Invision Power Board(U) v1.3.1 Final © 2003 IPS, Inc.