lord1nz
December 20, 2008 08:37 pm
Hi Guys - Just fitted recon water pump and heater pipes to my S1 V6 - I want to be sure to get all air out of system - any tips that might help - The V6 does not seem to have any bleed screws - Thanks Graeme
Andmcit
December 20, 2008 08:52 pm
The V6 cooling circuit is self bleeding - the small hose that runs from the convoluted top hose to
the expansion tank on the driver's wing is the actual bleeding circuit feeding through any air to
the tank which has a breather on it. Only other thing you can try to help it along is to give the top
hose a helping squeeze to coax the last trapped air out.
Andrew
lord1nz
December 26, 2008 09:39 pm
Thanks - Seems to have worked well - Back on road again and loving it.