Help - Search - Members - Calendar
Full Version Xm 2.0 Prestige

Club XM Forum > Sadly it has to go...
Zaphod
To be broken up soon, this is an early J plate prestige 5Speed manual so the same spec as an early 2.0 SEi before the wood and arm rest were added and not the later prestige with the digital climate and cloth bits of interior.

The interior however is spoken for unless someone wants ithe car whole, there is a fault on the fuel system, it will idle, and even drive but also cuts out (normally on a right hand bend), where upon it will somtimes start and idle perfectly but dies the second you try an apply power. It runs fine on LPG (the LPG system is not avaialble the tank is going on my TCT)

It needs new front pads and discs, exhaust (some muppet has welded two sections together) and 1 tyre, although has MOT till april and teh speedo cable has just failed (again!)

The car is in Marron has S2 bumper and nose cone (don't ask) and a dented nearside wing. Everything apart from the AC and the intermittant heater fan works. Strut tops are OK but not great (typical rusting round the top)

So all parts are availabe, let me know what you want and I will remove what I can, car is in hungerford (juct 14 M4)

Stewart
Zaphod
Well its off to the breakers tomorow, since no replies it will be going with almost everything on it

Stewart
Zaphod
Its gone sad.gif however I did take the working S1 glovebox lid off!

Stewart
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here .
Invision Power Board © 2001-2024 Invision Power Services, Inc.
Adapted by Shaun Harrison
Translated and modified by Fantome et David, Lafter