| Welcome Guest ( Log In | Register ) | Resend Validation Email |
![]() ![]() ![]() |
| cassmo |
Posted: May 17, 2006 08:31 pm
|
|
Member ![]() Group: Members Posts: 12 Member No.: 374 Joined: May 16, 2006 |
My MK2 XM appears to be permanently in sport suspension mode. As it is fitted with comfort spheres the ride is however quite acceptable. There does not seem to be any computer activity as detected by the radio nor is any voltage applied to the front solenoid valve.
I thought that either the computer is not working or it is being held in sport mode by one of the various sensors. What I need is information, where are the computer and its various sensors situated and if possible a wiring diagram. Any suggestions as to what to check would be appreciated. Thanks Cassmo |
| jorgy9 |
Posted: May 17, 2006 09:20 pm
|
![]() Andre's Mate ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1248 Member No.: 318 Joined: February 05, 2006 |
The easiest is to buy or make yourself an ECU fault reader (I have the one from Drapper tools) and plug it in the suspension ECU and it will tell you all that's wrong overthere (sensors etc).
George -------------------- XM '94 V6 12v, manual, Diravi - Mark "1.5" in black - bought: 138,000mls now: 167,000 miles
Axel '87 1.1 - real '70s Citroen handling (nope, it's not hydraulic!) My Flickr page I ...and II Is your XM as soft as it should be ?? ...Well, again: is it ??? Mine is not as good...but quite near! >>How I repaired my suspension part I ...and part II<< Kilmarnock -18mls south-west of Glasgow- |
![]() |
![]() ![]() ![]() |