| Welcome Guest ( Log In | Register ) | Resend Validation Email |
![]() ![]() ![]() |
| Lars |
Posted: April 12, 2006 10:05 am
|
|
New Member Group: Members Posts: 1 Member No.: 351 Joined: April 12, 2006 |
Hi,
I'm the happy owner of a XM from 1990, which has served me quite well for several years. Lately I discovered a leakage in the hydraulics of the steering system where two sealings and 3 O-rings may be worn. Unfortunately my local Citroen dealer just suggests to by another steering system as no repair kit is apparently available from Citroen???? On the 2 Sealings a number is stated: 1) Bendix B334519 2) BAD 1 FSL 0,5 ORWX7 20325 OFW1. F Have any of you an idea where I could get these items?? |
| Peter.N. |
Posted: April 12, 2006 02:56 pm
|
![]() Andre's Mate ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 3414 Member No.: 78 Joined: August 31, 2004 |
Getting the rack out,and in again is such a pig of a job that I would be inclined to fit a recon rack. GSF do them for about £160 but they charge about the same again as a deposit, presumably to make sure they get the old one back. The only job I have done that was more difficult was the head gasket. You need good access to the underneath of the car and plenty of patience!
Peter.N. P.S. Make sure you get the right one for the car, the hydraulic connections can be different sizes. -------------------- Used to have:
'96 'N' 2.1 td VSX manual estate White RP6695. '01 'Y' 406 GXL Hdi 110 manual estate silver '01 C5 estate 2.0. Hdi 110hp manual Located in Charmouth, Dorset. U.K. Blower transistors MJ 11015 |
| Sharo |
Posted: April 12, 2006 05:44 pm
|
|
Active Member ![]() ![]() Group: Members Posts: 42 Member No.: 140 Joined: March 18, 2005 |
00004048Q8 Repair kit for DIRASS on XMs1. Price is 25eur. I guess there are all neccessary sealnigs inside.
|
| techmanagain |
Posted: April 12, 2006 09:48 pm
|
||
|
Double Chevron ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 933 Member No.: 273 Joined: November 21, 2005 |
Part Number 4048 Q8 has been available for years. I suggest you ask your parts man to check his microfiche , or whatever. It helps to have the special kit of tools to ease the task of getting the o-rings to go back in and to fit them on the shaft before that. Workshop manual ref XM 444-3/2 gives all the information. -------------------- Xantia 2 litre HDi Saloon X reg 1999
.Peugeot 306 1.8 Petrol Automatic Hatchback. Now for sale. |
||
![]() |
![]() ![]() ![]() |