Engine Bay Fuse Box, How to remove| Welcome Guest ( Log In | Register ) | Resend Validation Email |
   |
Engine Bay Fuse Box, How to remove| Assich |
Posted: February 16, 2008 05:21 pm
|
|
Super Member  Group: Members Posts: 239 Member No.: 671 Joined: March 12, 2007  |
I often get less than 12volts when checking items and thought I would pull out the engine bay fuse box and check the state of the contacts. Things is having unbolted it I can't see how the wiring plugs unclip from the back of it.
|
 
|
| xmexclusive |
Posted: February 16, 2008 07:13 pm
|
|
Andre's Mate Group: Members Posts: 2877 Member No.: 144 Joined: April 06, 2005 |
Hi Assich
On the lower part of the sides you will see two sets of yellow blocks. These are latch bars that lock the wiring plugs in. Levered/pushed across they release the plugs for removal. One of the fixing bolts needs to be completely removed from the fuse box to get at one of the latch bars. Then with the two main feed wires unbolted the whole box is free be removed. The plastic lids and covers just unclip so you can then examine the contacts. Regards XMexc -------------------- An interest in 2.5TD's.
Location: Hampshire, U.K. |
|
|
| Assich |
Posted: February 17, 2008 11:12 am
|
|
Super Member Group: Members Posts: 239 Member No.: 671 Joined: March 12, 2007 |
Thanks.
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
 |
|
Skin arobase par alphega @ PCentraide 2005 (original)
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
Powered by Invision Power Board(U) v1.3.1 Final © 2003 IPS, Inc.