Bendix ABS S1, ABS| Welcome Guest ( Log In | Register ) | Resend Validation Email |
   |
Bendix ABS S1, ABS| woolybully |
Posted: March 12, 2019 06:42 pm
|
|
New Member Group: Members Posts: 6 Member No.: 56 Joined: May 03, 2004  |
Hi
Been reading the masses of info re S1 ABS sensors on these forums and can find ideas for replacing the fronts with Xantia sensors but not much about the rear sensors. Has anybody found a way of replacing the rear sensors with another make or models etc ??? Mine is a late S1 (1993) hatchback so has the later Bendix and ECU fitted. At present it seems my only way out is to replace the arms or even the whole rear subframe with secondhand ones that have working sensors attached, which does seem a bit extreme .... Cheers Tony |
 
|
| Peter.N. |
Posted: March 13, 2019 12:26 pm
|
 Andre's Mate  Group: Members Posts: 3414 Member No.: 78 Joined: August 31, 2004 |
Getting the sensors out is the problem, I have on occasion replaced the whole arm which as you say is a bit extreme but maybe the only way. Removing the arm is not to difficult providing the pin comes out of the actuating arm OK.
Peter -------------------- Used to have:
'96 'N' 2.1 td VSX manual estate White RP6695. '01 'Y' 406 GXL Hdi 110 manual estate silver '01 C5 estate 2.0. Hdi 110hp manual Located in Charmouth, Dorset. U.K. Blower transistors MJ 11015 |
|
|
| woolybully |
Posted: March 14, 2019 08:11 pm
|
|
New Member Group: Members Posts: 6 Member No.: 56 Joined: May 03, 2004 |
Umm well were trying again tomorrow on the extreme option but one nut refusing to budge on the recipient XM so far and haven't tried getting the donar one's off yet .......tony
|
|
|
0 User(s) are reading this topic (0 Guests and 0 Anonymous Users)
0 Members:
 |
|
Skin arobase par alphega @ PCentraide 2005 (original)
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
Powered by Invision Power Board(U) v1.3.1 Final © 2003 IPS, Inc.