Auto Heater Control, Not working| Welcome Guest ( Log In | Register ) | Resend Validation Email |
   |
Auto Heater Control, Not working| Big-Green Balls xm |
 Posted: November 26, 2004 06:46 pm
|
 Member  Group: Members Posts: 13 Member No.: 90 Joined: November 23, 2004  |
HI Guy & Girl
Just thought I would give some info for those with the same sort of problem !! Bought the XM a few weeks ago the auto setting on the heater was not working I just got round to fixing it very easy repair In the roof light is a sensor that tell the temp to computer this gets blocked with dust Etc stops the fan inside the sensor from working If you remove the light 4 screws under plastic cover the sensor is the black thing near the back of the light remove un clip the wires and remove sensor Clean with a paint brush and spray with switch cleaner Plug back in to make sure it is working fan should spin if not replace with new one then replace The biggest give away when it needs doing is a wearing noise coming from the light area when you first turn the ignition on sounds like it is running on steam Take it out and clean it Well I hope this will come in use for someone TTFN -------------------- XM 2.1 turbo Diesel
Zantia 2.0 Bx 19 Diesels Landrover Diesels |
 
|
| Madman |
Posted: November 27, 2004 10:44 am
|
|
Member Group: Members Posts: 10 Member No.: 92 Joined: November 25, 2004 |
Thanks for that, I have only had the XM a week and wondered what the noise was.
Madman |
|
|
| chrisr |
Posted: November 21, 2005 09:37 pm
|
|
Member Group: Members Posts: 24 Member No.: 264 Joined: October 30, 2005 |
Hi,
Thanks for the info, mine sounds like a bee in the roof! will try your fix. regards chrisr |
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
 |
|
Skin arobase par alphega @ PCentraide 2005 (original)
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
Powered by Invision Power Board(U) v1.3.1 Final © 2003 IPS, Inc.