2.1td Suspension Glitch?| Welcome Guest ( Log In | Register ) | Resend Validation Email |
   |
2.1td Suspension Glitch?| robbocop33 |
Posted: November 21, 2005 02:59 pm
|
|
Member  Group: Members Posts: 19 Member No.: 270 Joined: November 20, 2005  |
If i sit stationery and put the suspension to it's heighest setting it goes up fine,when i bring it down to normal position it comes down and you think its right down,but suddenly its like it has stuck at a a point then drops suddenly a couple of inches,then again!But does come down to the position i wanted,normal,anyone any ideas how to cure this,whats making it stick slightly at certain points?
|
 
|
| Peter.N. |
Posted: November 21, 2005 06:36 pm
|
 Andre's Mate Group: Members Posts: 3414 Member No.: 78 Joined: August 31, 2004 |
Its probably the height control valve/s sticking. The linkage between the anti roll bar and the valve rusts. Give it a few squirts of WD40 over a few days and hopefully that will cure it.
Peter.N. -------------------- Used to have:
'96 'N' 2.1 td VSX manual estate White RP6695. '01 'Y' 406 GXL Hdi 110 manual estate silver '01 C5 estate 2.0. Hdi 110hp manual Located in Charmouth, Dorset. U.K. Blower transistors MJ 11015 |
|
|
0 User(s) are reading this topic (0 Guests and 0 Anonymous Users)
0 Members:
 |
|
Skin arobase par alphega @ PCentraide 2005 (original)
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
Powered by Invision Power Board(U) v1.3.1 Final © 2003 IPS, Inc.