| Welcome Guest ( Log In | Register ) | Resend Validation Email |
![]() ![]() ![]() |
| techmanagain |
Posted: April 24, 2012 05:31 pm
|
|
Double Chevron ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 933 Member No.: 273 Joined: November 21, 2005 |
I would like to know what the wiring is to the rise & fall armrest on a 2.5 TD Exclusive Series 2 and what if any electrical items should be in the box itself. It appears to have been tanpered-with.
-------------------- Xantia 2 litre HDi Saloon X reg 1999
.Peugeot 306 1.8 Petrol Automatic Hatchback. Now for sale. |
| xmexclusive |
Posted: April 25, 2012 12:01 am
|
|
Andre's Mate ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2877 Member No.: 144 Joined: April 06, 2005 |
Steel frame base with same 2 wire motor as used for most XM window winders.
3 pin Orange wiring plug with contacts in the 2 outer positions only. The switch wiring reverses polarity to change direction. All again the same as the window wiring. Simple 12 volt feed with no relay as I remember, will check when I get a chance. John This post has been edited by xmexclusive on April 25, 2012 10:27 am -------------------- An interest in 2.5TD's.
Location: Hampshire, U.K. |
| techmanagain |
Posted: April 26, 2012 11:44 am
|
|
Double Chevron ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 933 Member No.: 273 Joined: November 21, 2005 |
Many thanks! If you double check, I would be pleased to hear any further details.Brian
-------------------- Xantia 2 litre HDi Saloon X reg 1999
.Peugeot 306 1.8 Petrol Automatic Hatchback. Now for sale. |
| dean |
Posted: April 26, 2012 07:12 pm
|
![]() Andre's Mate ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1441 Member No.: 852 Joined: May 23, 2007 |
This is mine before soldering it all up and fitting it, no relay is used.
![]() Photo02072200 by Deanxm, on Flickr D -------------------- 92 xm 20i prestige auto (modified)R.P 5678
96 Xantia Activa (modified) location-Isle of wight |
![]() |
![]() ![]() ![]() |