| Welcome Guest ( Log In | Register ) | Resend Validation Email |
![]() ![]() ![]() |
| kenhall1202 |
Posted: June 02, 2011 10:41 am
|
![]() Super Member ![]() ![]() ![]() ![]() Group: Members Posts: 410 Member No.: 322 Joined: February 09, 2006 |
Can anyone tell me which corner of the 2.1TD cylinder head shows the gasket cutout notches which identify the gasket thickness? I suspect it is the rear right hand corner (looking from the front of the car)but before I start moving things out of the way to get a better look I would appreciate confirmation that I'm looking in the right area. Thanks.
Ken -------------------- 97R XM 2.1 TD VSX Saloon, RP 7249, Emerald Green
96P ZX 1.9TD Saloon (Alas no more, rear ended and written off!!) replaced by: '55 C4 2.0HDI Exclusive ('Alive with technology' or should it read 'Even more things to go wrong!') Location: West Cumbria, UK |
| citroenxm |
Posted: June 02, 2011 03:21 pm
|
|
Andre's Mate ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2058 Member No.: 257 Joined: October 10, 2005 |
Hi Kenhall
Yes, the same area as the smaller 1.9 XUD engine... Im sure of it... Paul -------------------- 1993 K Reg 3.0 V6 12 Valve Auto (Green) LPG S1.5 SORNd
1990 H reg 3.0 V6 24 valve Manual. Grey S1 SORNd 1991 H reg 2.1 SED td Manual, Maroon. SORNd 1992 K reg 2.1 SD Manual. Getting ready to sell on 1998 V reg Xantia HDi Exclusive Silver Location: YOU'LL NEVER FIND ME!! |
| Dieselman |
Posted: June 02, 2011 08:15 pm
|
|
Advanced Member ![]() ![]() ![]() Group: Members Posts: 192 Member No.: 1472 Joined: February 01, 2009 |
It is the rear n/s corner, but beware you can't really see with the fuel heater mounted and also some replacements don't have the markings on.
I recently fitted a Payen MLS gasket and it was graded on the pack, but no marks on the gasket tab, so I dot punched three marks.. The last Payen MLS I fitted did have holes for markers. |
![]() |
![]() ![]() ![]() |