AurisKo 2.1 TD rebuild| Welcome Guest ( Log In | Register ) | Resend Validation Email |
   |
AurisKo 2.1 TD rebuild| AurisKo |
Posted: April 12, 2011 08:11 pm
|
|
New Member Group: Members Posts: 8 Member No.: 1697 Joined: April 04, 2011  |
Hello ,
I want to introduce my XM repairs. The main problem of engine overheating, because the fans will not turn on. Therefore purged head gasket, Burned valves and so on. The first point will be to repair the engine.      |
 
|
| Peter.N. |
Posted: April 12, 2011 09:42 pm
|
 Andre's Mate  Group: Members Posts: 3414 Member No.: 78 Joined: August 31, 2004 |
The block looks nice and shiny
 -------------------- Used to have:
'96 'N' 2.1 td VSX manual estate White RP6695. '01 'Y' 406 GXL Hdi 110 manual estate silver '01 C5 estate 2.0. Hdi 110hp manual Located in Charmouth, Dorset. U.K. Blower transistors MJ 11015 |
|
|
| citroenxm |
Posted: April 13, 2011 10:09 am
|
|
Andre's Mate Group: Members Posts: 2058 Member No.: 257 Joined: October 10, 2005 |
Nice work..
Can I ask though, off what car are those alloys from??? Paul -------------------- 1993 K Reg 3.0 V6 12 Valve Auto (Green) LPG S1.5 SORNd
1990 H reg 3.0 V6 24 valve Manual. Grey S1 SORNd 1991 H reg 2.1 SED td Manual, Maroon. SORNd 1992 K reg 2.1 SD Manual. Getting ready to sell on 1998 V reg Xantia HDi Exclusive Silver Location: YOU'LL NEVER FIND ME!! |
|
|
| Dieselman |
Posted: April 13, 2011 12:49 pm
|
|
Advanced Member Group: Members Posts: 192 Member No.: 1472 Joined: February 01, 2009 |
QUOTE (citroenxm @ April 13, 2011 10:09 am)  Nice work.. Can I ask though, off what car are those alloys from??? They look like Volvo 760 wheels, if so I wonder if the offset is correct with that being RWD.  This post has been edited by Dieselman on April 13, 2011 12:50 pm |
|
|
| AurisKo |
Posted: April 13, 2011 07:41 pm
|
|
New Member Group: Members Posts: 8 Member No.: 1697 Joined: April 04, 2011 |
I think that is the original XM wheels, but unfortunately I can not find info about them.
 |
|
|
| AurisKo |
Posted: April 13, 2011 07:55 pm
|
|
New Member Group: Members Posts: 8 Member No.: 1697 Joined: April 04, 2011 |
So I add photos to work. Put on the engine head and collect what is around.
        Came a new steering column and a new master brake dispenser.   |
|
|
| AurisKo |
Posted: April 16, 2011 08:20 pm
|
|
New Member Group: Members Posts: 8 Member No.: 1697 Joined: April 04, 2011 |
So today's work. Welded exhaust manifold in the event and placed. Also, removal of the crosshead
    |
|
|
| AurisKo |
Posted: April 18, 2011 08:19 pm
|
|
New Member Group: Members Posts: 8 Member No.: 1697 Joined: April 04, 2011 |
Turbo defects found after the enclosure
 Cracked at a hot sink wastegate valve   It is also worn the axle.   |
|
|
| AurisKo |
Posted: May 01, 2012 11:19 am
|
|
New Member Group: Members Posts: 8 Member No.: 1697 Joined: April 04, 2011 |
Hello everyone
I have been here a long time now. Need to show themselves. Plan changed much during this period. Since white XM much better condition than other managed, running hydractive. Therefore I decided to stay white XM and the red retain as details of donors. White is replaced with new steering column, new brake dispenser, washouts height corrector, filters, new LHM, replaced the main belt tensioner, water pump, steering column corner joints, two new split axle corner joints, arranged suspension, new gear struts, a new front retaining rubber shock absorbers, the new engine cushion. After all these repairs, and perhaps thanks to a new brake dispenser, car rear unsettled takes a few days (not antisink). With the XM in June we plan to visit Paris       |
|
|
0 User(s) are reading this topic (0 Guests and 0 Anonymous Users)
0 Members:
 |
|
Skin arobase par alphega @ PCentraide 2005 (original)
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
Powered by Invision Power Board(U) v1.3.1 Final © 2003 IPS, Inc.