Dot Matrix Fault Display Pin-out (mk2), connection details needed| Welcome Guest ( Log In | Register ) | Resend Validation Email |
   |
Dot Matrix Fault Display Pin-out (mk2), connection details needed| JwC |
Posted: June 26, 2010 08:44 pm
|
|
New Member Group: Members Posts: 8 Member No.: 1570 Joined: June 12, 2010  |
Hi
Does anyone know which pins are the power pins to the Mk2 matrix displays? I need to check one to see what state it is in, but I'd prefer not to dismantle the car to do that! Failing that a cct diagram would enable me to chase through the pcb layout and figure it out. But I'd guess the cct diagram is far less likely to be available. Thanks |
 
|
| robertmnorton |
Posted: June 27, 2010 11:37 am
|
|
Super Member  Group: Members Posts: 361 Member No.: 586 Joined: January 13, 2007 |
Hi JwC, log onto www.ebaman.com,register for free,and download full service manual(including electrical schematics) for S2 and S1.It will be easier to print off the schematic relative to your RP than long winded dialogue.This subject was also recently dealt with on the .co.uk site.
robertm |
|
|
| JwC |
Posted: June 27, 2010 04:20 pm
|
|
New Member Group: Members Posts: 8 Member No.: 1570 Joined: June 12, 2010 |
Thanks I'll do that. In fact I have now managed to trace the power input cct so I'm part way there!
|
|
|
| Retron |
Posted: April 16, 2011 03:43 pm
|
|
New Member Group: Members Posts: 7 Member No.: 1644 Joined: January 03, 2011 |
By the way. Is it possible to install S1 incidents display to S2?
|
|
|
| xmexclusive |
Posted: April 16, 2011 05:45 pm
|
|
Andre's Mate Group: Members Posts: 2877 Member No.: 144 Joined: April 06, 2005 |
Hi Retron
The position, mounting points and electrical plugs are identical but there are some pin allocation and functional differences between the two types of display. Major difference is the Mk2 accepts serial signals from the Phillips radio. John This post has been edited by xmexclusive on April 16, 2011 05:45 pm -------------------- An interest in 2.5TD's.
Location: Hampshire, U.K. |
|
|
| Retron |
Posted: April 16, 2011 10:01 pm
|
|
New Member Group: Members Posts: 7 Member No.: 1644 Joined: January 03, 2011 |
What if I just wanted to replace onlt the screen from S1 to S2 display. Has anyone tried that?
|
|
|
| xmexclusive |
Posted: April 16, 2011 11:13 pm
|
|
Andre's Mate Group: Members Posts: 2877 Member No.: 144 Joined: April 06, 2005 |
Stripped both types and decided the lcd displays were too different.
That was a good few years ago so cannot remember any detail. John -------------------- An interest in 2.5TD's.
Location: Hampshire, U.K. |
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
 |
|
Skin arobase par alphega @ PCentraide 2005 (original)
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
Powered by Invision Power Board(U) v1.3.1 Final © 2003 IPS, Inc.