| Welcome Guest ( Log In | Register ) | Resend Validation Email |
![]() ![]() |
| hayamburuk |
Posted: July 08, 2010 01:22 pm
|
|
New Member Group: Members Posts: 2 Member No.: 1586 Joined: July 08, 2010 |
Hi everyone
here I am with my 1992 XM 2,0Si, White colour. Unfortunately she's down on her haunches with Total Hydraulic Failure at the moment, but until then she was working perfectly, no problems at all. Unless anyone has a pipe, I'll have to get one made. See you! |
| Peter.N. |
Posted: July 08, 2010 02:03 pm
|
![]() Andre's Mate ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 3414 Member No.: 78 Joined: August 31, 2004 |
Hi
Welcome to the club. Is it the pipe from the pump to the regulator that has failed? Peter -------------------- Used to have:
'96 'N' 2.1 td VSX manual estate White RP6695. '01 'Y' 406 GXL Hdi 110 manual estate silver '01 C5 estate 2.0. Hdi 110hp manual Located in Charmouth, Dorset. U.K. Blower transistors MJ 11015 |
| hayamburuk |
Posted: July 08, 2010 02:34 pm
|
|
New Member Group: Members Posts: 2 Member No.: 1586 Joined: July 08, 2010 |
hello Peter,
Yes, it's the pipe from the pump to the accumulator/regulator whatsit on the front of the engine. It's failed at the union on the flange. (the accumulator/regulator end) I've taken it off and stuck my thumb on the pump end, blown into it and I could feel air blowing up my nose. I hear Citroen don't make these any more, so if anyone knows of anywhere I can get one already made with the bits on, I'd be very grateful. Otherwise I have to get one made especially, and I am not blessed with much time, for I wish to drive to Hungary at the end of the month...I am based in Reading. I can't remember the RP number but I think it's 5183. It's a series one, 2 litre injection. Electric seats, cloth upholstery in grey, automatic setting on the blower, leccy sunroof and windows all round. Zaránd This post has been edited by hayamburuk on July 08, 2010 02:36 pm |
![]() |
![]() ![]() |