Powered by Invision Power Board

Welcome Guest ( Log In | Register ) Resend Validation Email


  Reply to this topicStart new topicStart Poll

> Xm Hatchback 3.01 V6 Exclusive, Bodywork repair
cagee
Posted: June 18, 2010 05:06 pm


New Member


Group: Members
Posts: 4
Member No.: 1575
Joined: June 18, 2010




Hi, my 1999 xm eclusive, which I have owned from new is still looking great except the Chrome (like ) inserts to the front bumper and side pieces have developed white dicolourations, which I presume is water absorbsion . My main dealer wants to replace the whole bumper assembly and side pieces, which will also include respraying at an enormous cost. Any suggestions as to how or if this can be treated would be appreciated ,

Keith
PMEmail Poster
Top
noz
Posted: June 18, 2010 05:24 pm


Andre's Mate
******

Group: Members
Posts: 1673
Member No.: 12
Joined: November 22, 2003




You need to speak to Brian Primmer or Techmanagain as he's called on here. He also inhabits the XM-L list frequently. Since the PM system is not working at the moment you'd be better trying XM-L first:

http://autos.groups.yahoo.com/group/XM-L/messages

Brian makes replacement strips out of stainless which will of course never rust or discolour again.

Cheers

noz cool.gif


--------------------
'10 '59' C5 2.0 HDi Exclusive Tourer Metallic Grey
'97 'P' XM 2.5 TD VSX Saloon RP 6610 Blue
'97 'R' XM 2.5 TD Exclusive Saloon RP 7158 Silver
'88 CX 22TRS Croisette
Location: Avonbridge - Stirlingshire - Central Scotland
PMEmail PosterICQAOLYahoo
Top
xmexclusive
Posted: June 19, 2010 12:26 am


Andre's Mate
******

Group: Members
Posts: 2877
Member No.: 144
Joined: April 06, 2005




Hi Keith

Brian Pimmer only supplies the 8 side strips in stainless steel (4 door & 4 wing).
Good value items highly recommended by a good few XM owners.
The Bumper strips are Citroen only, expensive and on back order.
All the plastic chrome strips can be removed from the bumpers and door strips.
Work a wide wood chisel blade under the bottom edge of the strip and gently lever.
Start at the centre of each strip which will unclip and release without damage if care is used. Once out it is possible to get the strips prepared, sprayed up silver and laqured for refitting.

John


--------------------
An interest in 2.5TD's.
Location: Hampshire, U.K.
PMEmail Poster
Top
minijet
Posted: June 19, 2010 12:28 am


Double Chevron
*****

Group: Members
Posts: 512
Member No.: 998
Joined: August 26, 2007




.
Techman only makes the straight sections for the sides of the car.

If you need the curved front and rear inserts you'll have to go to Citroen.
They're around £200 for both ends.

Part numbers and prices are.....

Front (3 sections) - 0000745279 - £96.51

Rear - 95656457 - £101.46


Paul

.

Ooops, sorry to repeat John's message, he got there just before me rolleyes.gif



This post has been edited by minijet on June 19, 2010 12:33 am


--------------------
94M 2.0 Turbo Exclusive auto hatch, Green, RP 6552

94M 2.1 TD Exclusive auto hatch, Green, RP 6427

94M 2.0 Turbo SX auto hatch, White, RP 6430
PMEmail Poster
Top
xmexclusive
Posted: June 19, 2010 09:36 am


Andre's Mate
******

Group: Members
Posts: 2877
Member No.: 144
Joined: April 06, 2005




Hi Paul

More than one reply along the same lines builds the site and gives confidence.
You added prices and part numbers which helps no end.
It also prompted me to remember that front bumper trim has a few variations.
While most Mk2's had headlamp washers (so 3 sections of trim) not all did so some need a single long trim. I also think that Citroen varied the fixing slots between the Mk1 and Mk2 front bumpers so there may well be 2 types of long trim pieces.

John


--------------------
An interest in 2.5TD's.
Location: Hampshire, U.K.
PMEmail Poster
Top
minijet
Posted: June 19, 2010 01:38 pm


Double Chevron
*****

Group: Members
Posts: 512
Member No.: 998
Joined: August 26, 2007




.
Thanks for pointing that out John.

I should have mentioned that the part no's and prices that I posted are for a 1994 S2 2.0 turbo exclusive.

Paul

.


--------------------
94M 2.0 Turbo Exclusive auto hatch, Green, RP 6552

94M 2.1 TD Exclusive auto hatch, Green, RP 6427

94M 2.0 Turbo SX auto hatch, White, RP 6430
PMEmail Poster
Top
cagee
Posted: June 19, 2010 04:03 pm


New Member


Group: Members
Posts: 4
Member No.: 1575
Joined: June 18, 2010




Many thanks to all of you for the most useful info. I will certainly be following it up. My local scratch and dent repairer said he could paint them silver and lacquer over, but with no guarantees as to success.

cheers Keith
PMEmail Poster
Top
DerekW
Posted: June 20, 2010 06:07 pm


Andre's Mate
******

Group: Members
Posts: 1320
Member No.: 173
Joined: June 01, 2005




Being poverty stricken and lazy to boot, I covered over the white bits on my '99 V6 with stick on aluminium tape. Not Concourse but it looks OK at a reasonable distance.

I also stopped using a pressure washer on the car biggrin.gif .

This post has been edited by DerekW on June 20, 2010 06:08 pm


--------------------
1999 3.0V624v Exclusive Black! (RP8362)
2004 C3 Sensodrive Exclusive
1994 ZX Aura 1.8 auto
Location: 5 miles North of Boston, Lincolnshire
PMEmail Poster
Top
0 User(s) are reading this topic (0 Guests and 0 Anonymous Users)
0 Members:

Topic Options Reply to this topicStart new topicStart Poll

 


Skin arobase par alphega @ PCentraide 2005 (original)
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre