Bearing Noise, I think| Welcome Guest ( Log In | Register ) | Resend Validation Email |
   |
Bearing Noise, I think| igorvandyke |
Posted: October 08, 2005 04:05 pm
|
|
New Member Group: Members Posts: 4 Member No.: 242 Joined: September 15, 2005  |
I've got an increasing rumble from the front of my "M" reg. XM estate that starts around 20 MPH and gets more annoying the faster we go. I guess a wheel bearing - anyone got any other ideas or experiance of this or idea of cost to repair please?
Igor |
 
|
| rosspa |
Posted: October 12, 2005 09:35 am
|
|
Advanced Member  Group: Members Posts: 54 Member No.: 28 Joined: January 09, 2004 |
Sounds like a front wheel bearing. To replace, the hub needs to be removed.
The last one, that I did, I replaced the complete hub with that from a scrapped car for £20. If you do this, try to make sure that the scrapman does NOT cut through the ABS sensor wire, it is easy to unplug and will save alot of heartache later changing and adjusting the sensor. -------------------- Citroen XM 2.5TD - 2 off. Have also owned 2.1TD & 3.0l 24V XM. BX,'3 DS,s numerous GS's, H-Van, Ami, Dyane & loads of 2CV's.
|
|
|
| Peter.N. |
Posted: October 16, 2005 11:58 pm
|
 Andre's Mate Group: Members Posts: 3414 Member No.: 78 Joined: August 31, 2004 |
They are not to difficult to change if you have a welder, the most difficult part is removing the outer shell of the bearing from the hub, if you run a ring of weld around the inside of the outer part of the bearing when it cools it will shrink the bearing and will then come out fairly easily.
Peter.N. -------------------- Used to have:
'96 'N' 2.1 td VSX manual estate White RP6695. '01 'Y' 406 GXL Hdi 110 manual estate silver '01 C5 estate 2.0. Hdi 110hp manual Located in Charmouth, Dorset. U.K. Blower transistors MJ 11015 |
|
|
| Peter.N. |
Posted: October 16, 2005 11:59 pm
|
|
Andre's Mate Group: Members Posts: 3414 Member No.: 78 Joined: August 31, 2004 |
They are not to difficult to change if you have a welder, the most difficult part is removing the outer shell of the bearing from the hub, if you run a ring of weld around the inside of the outer part of the bearing when it cools it will shrink the bearing and will then come out fairly easily.
Peter.N. -------------------- Used to have:
'96 'N' 2.1 td VSX manual estate White RP6695. '01 'Y' 406 GXL Hdi 110 manual estate silver '01 C5 estate 2.0. Hdi 110hp manual Located in Charmouth, Dorset. U.K. Blower transistors MJ 11015 |
|
|
| Niek |
Posted: October 17, 2005 08:15 pm
|
|
Advanced Member Group: Members Posts: 83 Member No.: 175 Joined: June 05, 2005 |
Hello all,
Peter would you mind doing up a self-helpish file for that? I feel I might have one coming up soon. Cheers, Niek -------------------- '94 Xm 2.5 TD vsx + cruise + fogs!!
('92 Bx 1.4i Deauville) ('86 2cv6 Charleston) |
|
|
| Peter.N. |
Posted: October 17, 2005 11:52 pm
|
|
Andre's Mate Group: Members Posts: 3414 Member No.: 78 Joined: August 31, 2004 |
Hi Niek
Its sometime since I did one, although I can hear one coming on now, its been whining on and off for the last 10k but getting worse so slowly that I am in no hurry to do it although I allready have the bearing in stock. If you get desperate I will have a look at the bearing, that will hopefully remind me! Peter.N. -------------------- Used to have:
'96 'N' 2.1 td VSX manual estate White RP6695. '01 'Y' 406 GXL Hdi 110 manual estate silver '01 C5 estate 2.0. Hdi 110hp manual Located in Charmouth, Dorset. U.K. Blower transistors MJ 11015 |
|
|
| Niek |
Posted: October 18, 2005 09:34 pm
|
|
Advanced Member Group: Members Posts: 83 Member No.: 175 Joined: June 05, 2005 |
Ok, I'll let you know when it happens.
If yours goes first then all should be well Cheers, Niek -------------------- '94 Xm 2.5 TD vsx + cruise + fogs!!
('92 Bx 1.4i Deauville) ('86 2cv6 Charleston) |
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
 |
|
Skin arobase par alphega @ PCentraide 2005 (original)
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
Powered by Invision Power Board(U) v1.3.1 Final © 2003 IPS, Inc.