| Welcome Guest ( Log In | Register ) | Resend Validation Email |
![]() ![]() ![]() |
| selfote44 |
Posted: March 14, 2009 09:40 am
|
|
New Member Group: Members Posts: 1 Member No.: 1500 Joined: March 14, 2009 |
This is my first post here; sorry for my english
One month ago I buy a XM 2.5 TD. This lamp always turn on when i put the key in the M position, but two days before i didn't see any light there, as today. the wheather is less cold (Spain) in these days. I don't know if this is a problem or only is cold depend. Sergio. |
| Peter.N. |
Posted: March 14, 2009 09:54 am
|
![]() Andre's Mate ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 3414 Member No.: 78 Joined: August 31, 2004 |
Hi Sergio
Welcome to the club, you'r english is fine. Your problem could be a bad connection on the cold start relay, or that the system is not working. To test, connect a voltmeter between one of the glow plug connections and earth on the engine or chassis, you should have a reading of 12 volts when you turn the key into the 'glow plug' positition which should last for 10 or 15 seconds. Peter.N. -------------------- Used to have:
'96 'N' 2.1 td VSX manual estate White RP6695. '01 'Y' 406 GXL Hdi 110 manual estate silver '01 C5 estate 2.0. Hdi 110hp manual Located in Charmouth, Dorset. U.K. Blower transistors MJ 11015 |
| onthecut |
Posted: March 14, 2009 01:34 pm
|
|
Double Chevron ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 971 Member No.: 336 Joined: March 10, 2006 |
Hi Sergio
The duration of the lamp does vary, but it always makes an appearance when I turn the ignition on. If it's warm and I am restarting quickly after turning off, it may only appear for a second or so. If I may add a suggestion to Peter's -- it could be the bulb that's gone. Mike. -------------------- XM 2.5VSX Estate RP 7185
XM 2.5VSX Estate RP 7289 |
![]() |
![]() ![]() ![]() |