Variable Wiper Control Failure| Welcome Guest ( Log In | Register ) | Resend Validation Email |
   |
Variable Wiper Control Failure| jcoleman |
Posted: May 25, 2007 11:40 am
|
|
New Member Group: Members Posts: 2 Member No.: 856 Joined: May 25, 2007  |
I have an Exclusive 2.5tD which has the variable wiper controls but they do not vary apparently stuck on the slowest rate (at a guess). Otherwise wipers are fine. Obviously this could be the switch or the control unit. Before I seek out parts and undertakle fixes I'd appreciate any experience that might suggest what to try first.
|
 
|
| jorgy9 |
Posted: May 25, 2007 02:40 pm
|
 Andre's Mate  Group: Members Posts: 1248 Member No.: 318 Joined: February 05, 2006 |
On mine it was rather sticking to the long period, about 14 secs -the short is about 4secs in mine-. I opened up the stalk and cleaned the variable resistor's surface and it's OK now. Could also be a not-very-tight contact (in very hot weather my indicator stalk is playing up). Opening up the stalk down to its smallest components is straightforward -there are no screws or anything weird, just soft plastics clipping together-.
regards George -------------------- XM '94 V6 12v, manual, Diravi - Mark "1.5" in black - bought: 138,000mls now: 167,000 miles
Axel '87 1.1 - real '70s Citroen handling (nope, it's not hydraulic!) My Flickr page I ...and II Is your XM as soft as it should be ?? ...Well, again: is it ??? Mine is not as good...but quite near! >>How I repaired my suspension part I ...and part II<< Kilmarnock -18mls south-west of Glasgow- |
|
|
0 User(s) are reading this topic (0 Guests and 0 Anonymous Users)
0 Members:
 |
|
Skin arobase par alphega @ PCentraide 2005 (original)
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
Powered by Invision Power Board(U) v1.3.1 Final © 2003 IPS, Inc.