Welcome Guest ( Log In | Register ) | Resend Validation Email |
mcmoonter |
Posted: September 29, 2011 09:10 pm
|
Advanced Member Group: Members Posts: 105 Member No.: 600 Joined: January 18, 2007 |
'02 C5
I have left my car standing for four months while I bicycled across the USA. The gremlins have been busy while I was peddaling. The C5 has a light sensitive switch which automatically turns on the headlights on to the dipped beam when you turn on the ignition and it is dark outside. neither is bulb is lighting up, though the main beam bulbs do. When turning the switch on the end of the indicator stalk the result is the same. The side lights work. I have not had a chance to check both dipped beam bulbs yet, but I am suspicious that a relay or fuse may be the culprit for their non illumination. Does anyone know where I might locate the relay? Im guessin there will be a fuse to protect the dipped beam circuit too. Any help would be useful. Thanks in advance Peter This post has been edited by mcmoonter on September 29, 2011 09:13 pm |
mcmoonter |
Posted: October 03, 2011 12:20 am
|
Advanced Member Group: Members Posts: 105 Member No.: 600 Joined: January 18, 2007 |
Turns out both headlamp bulbs had blown.
|
noz |
Posted: October 05, 2011 08:58 am
|
Andre's Mate Group: Members Posts: 1673 Member No.: 12 Joined: November 22, 2003 |
Hi Peter,
Sorry, I wasn't tring to ignore your post. However, I don't have any wiring diagrams for the C5 and I've never worked on one. Good to see you found what turned out to be a simple problem with an easy fix. If only they all were like that ! cheers noz -------------------- '10 '59' C5 2.0 HDi Exclusive Tourer Metallic Grey
'97 'P' XM 2.5 TD VSX Saloon RP 6610 Blue '97 'R' XM 2.5 TD Exclusive Saloon RP 7158 Silver '88 CX 22TRS Croisette Location: Avonbridge - Stirlingshire - Central Scotland |