Xantia V6, warning light in temp gauge+stop lamp on| Welcome Guest ( Log In | Register ) | Resend Validation Email |
   |
Xantia V6, warning light in temp gauge+stop lamp on| roly |
Posted: August 01, 2011 03:19 pm
|
|
New Member Group: Members Posts: 3 Member No.: 1039 Joined: October 08, 2007  |
Hi I'm new to this site, having owned two XM's a BX in the past and a Xantia V6 needless to say I a bit of a Citroen fan. I'm having a problem with the Xantia v6 at present. The warning light in temp gauge+stop lamps stay alight but the temperature gauge is just under 80c as usual, and the coolant level is OK. Also the fans stay on for a long time after switch off.
Having read my Haynes Xantia general manual (no Haynes manual for V6), it appears to be a faulty Bitron sensor, but I don't know where that is on the engine or radiator. So have a few questions. 1) Where is the bitron sensor in the engine bay? 2) Where can I purchase a Xantia V6 manual? 3) Any other ideas relating to my problem. One last bit of information. This fault is intermittent, and the problem is not always there and the car works OK for a few days. I hope somebody can shed a light on my problem. Rolyh |
 
|
| davetherave |
Posted: August 01, 2011 09:06 pm
|
|
Member  Group: Members Posts: 13 Member No.: 1544 Joined: May 05, 2010 |
No idea about the problems, but take a look at www.frenchcarforum.co.uk.
Lots of knowledge about the xantia v6 over there. Dave |
|
|
| roly |
Posted: August 02, 2011 02:23 pm
|
|
New Member Group: Members Posts: 3 Member No.: 1039 Joined: October 08, 2007 |
Thanks davetherave,
There is loads of information on this sight; relating to my problem. rolyh |
|
|
| citroenxm |
Posted: August 02, 2011 09:06 pm
|
|
Andre's Mate Group: Members Posts: 2058 Member No.: 257 Joined: October 10, 2005 |
It is ONLY when you switch the Air Con On????
These lights also relate to faulty Cooling Fan ralys... which I guess this is what it is.. Its common on Xantias... Remove the grill, and between the fans theres a triangular box, remove the top and there three relays, remove each one and check for a corroded or bad connection to the relays... PAul -------------------- 1993 K Reg 3.0 V6 12 Valve Auto (Green) LPG S1.5 SORNd
1990 H reg 3.0 V6 24 valve Manual. Grey S1 SORNd 1991 H reg 2.1 SED td Manual, Maroon. SORNd 1992 K reg 2.1 SD Manual. Getting ready to sell on 1998 V reg Xantia HDi Exclusive Silver Location: YOU'LL NEVER FIND ME!! |
|
|
| roly |
Posted: August 04, 2011 09:03 am
|
|
New Member Group: Members Posts: 3 Member No.: 1039 Joined: October 08, 2007 |
Thank you citoenxm,
I have tried this, and it makes no difference the fans still run fast and the water temp gauge light and stop stay on. There aircon is not as good as it used to be. Could the fault be low pressure in the aircon condenser that is causing the pressure switch no to make? Having read various themes on this subject it seems to point to the bitron temperature sensor. Do you have any idea where it is on the Xantia v6? As the fault is intermittent it might be worth cleaning the contacts of this and the relays. Rolyh |
|
|
| Howey |
Posted: October 30, 2012 03:41 pm
|
|
Member Group: Members Posts: 21 Member No.: 354 Joined: April 16, 2006 |
Hi,
Does anybody know where the Bitron densor is on a Xantia V6? Rolyh |
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
 |
|
Skin arobase par alphega @ PCentraide 2005 (original)
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
V1.3 par Elianora la blanche @ La Caverne de la Rose pourpre
Powered by Invision Power Board(U) v1.3.1 Final © 2003 IPS, Inc.